How to Replace Mirror 03-08 Toyota Corolla
Difficulty: Intermediate · About 75 min · Toyota Corolla
Replace a side mirror on a 2003–2008 Toyota Corolla by removing the interior door trim, disconnecting the mirror and tweeter wiring, and testing mirror adjustment after reassembly.
Tools you will need
- Socket Extensions
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- Putty Knife
- 10mm Wrench
- 10mm Socket
- Door Panel Removal Tool
- Ratchet
- Cloth Rags
Parts and supplies
- Side-view mirror assembly
Steps
- Remove the door panel
Protect the trim with a cloth and release the mirror sail panel and armrest switch panel. Unplug the switch harness, remove the panel screws, then work around the edges with a panel tool and lift the panel off.
- Disconnect and remove the old mirror
Unplug the mirror and tweeter connectors, then remove the mirror mounting nuts from inside the door. Hold the mirror as the last fastener comes free and guide its wiring through the opening.
- Install the replacement mirror
Feed the new mirror harness through the door and seat the mirror against the mounting surface. Secure it with the retaining nuts and reconnect both mirror and tweeter wiring.
- Reinstall the panel and test
Route the wiring through its original clips, reconnect the switch harness, and engage the door-panel clips. Reinstall the screws and trim covers, then test mirror adjustment and any equipped functions.
Check your vehicle’s repair manual for exact specifications and fit.