How to Remove Front Bumper 03-08 Honda Pilot
Difficulty: Intermediate · About 60 min · Honda Pilot
Remove and reinstall the front bumper cover on a 2003–2008 Honda Pilot, disconnecting fog lamps and restoring the radiator cover and splash shield.
Tools you will need
- 10mm socket and extensions
- Ratchet
- Flat blade screwdriver
- Phillips screwdriver
- Fastener remover
- Assistant
Steps
- Remove the upper retainers
Open the hood and remove the radiator cover clips. Release the grille retainers and remove the fasteners at both wheel wells and along the lower bumper edge.
- Disconnect bumper wiring
Release the splash shield clips and any mud guard fasteners. Pull the bumper corners free from their brackets, support the cover with help, and disconnect the fog lamp plugs.
- Remove the bumper cover
Unclip the fog lamp wiring from its brackets and lift the bumper cover away from the vehicle. Place it on a protected surface to avoid scratching the finish.
- Reinstall and align the bumper
Reconnect fog lamp wiring and align the bumper with its brackets. Engage the bumper edges and reinstall the lower splash shield fasteners and wheel well screws.
- Restore upper trim and verify
Reinstall the grille retainers, radiator cover, and its clips. Check bumper alignment and test the fog lamps before driving.
Check your vehicle’s repair manual for exact specifications and fit.