How to Replace Blower Motor with Fan Cage 96-07 Ford Taurus
Difficulty: Beginner · About 60 min · Ford Taurus
Replace the heater and A/C blower motor with fan cage on a 1996–2007 Ford Taurus by lowering the glove box for access, disconnecting the motor harness, and testing operation before refitting the trim.
Tools you will need
- Socket Extensions
- Phillips Head Screwdriver
- 8mm Socket
- Ratchet
Parts and supplies
- Blower motor and fan cage assembly
Steps
- Remove the lower vanity panel
Release the push clips beneath the glove box and lower the vanity panel. Open the glove box and gently press its side stops inward so it can swing down for better access.
- Disconnect and remove the blower motor
Unplug the blower harness, then remove the three mounting bolts with an extension. Lower the motor and fan cage out of the housing without pulling on the wiring.
- Install and test the replacement motor
Position the replacement assembly in the housing, reconnect its harness, and reinstall the mounting bolts. Run the fan through its speed settings to check for smooth operation and unusual vibration.
- Refit the glove box and trim
Return the glove box to its normal position and reinstall the lower vanity panel, engaging each push clip. Confirm the panel sits flush and the blower continues to operate correctly.
Check your vehicle’s repair manual for exact specifications and fit.