How to Replace Side Mirror 13-14 Subaru Crosstrek
Difficulty: Intermediate · About 4 min · Subaru Crosstrek
Replace the side mirror on a 2013–2014 Subaru Crosstrek by removing the front door panel, routing the mirror connector, and testing adjustment before restoring the vapor barrier.
Tools you will need
- Razor Blade / Gasket Scraper
- 10mm Socket
- Ratchet
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- Trim Tool Set
Parts and supplies
- Compatible side mirror assembly
Steps
Remove the door panel
Pry out the pull and handle covers, remove the screw, and release the panel clips. Lift the panel away, disconnect the latch cables, and unplug the window switch.
Expose and remove the mirror
Carefully separate the vapor barrier enough to reach the mirror connector. Unplug the harness, remove the mirror mounting nuts, and guide the mirror out of the door.
Transfer the mirror cap if needed
If the replacement mirror is supplied without a finished cap, release the old upper and lower covers without breaking their clips. Press them onto the replacement until they latch.
Install and connect the mirror
Route the harness through the opening, seat the mirror on the door, and tighten the mounting nuts securely. Reconnect the plug and reseal the vapor barrier against the door.
Reinstall the panel and test
Reconnect the window switch and latch cables, align the panel, and press its clips into place. Reinstall the trim screw and covers, then test mirror adjustment and window operation.
Check your vehicle’s repair manual for exact specifications and fit.