How to Replace Tail Light 96-00 Toyota 4Runner
Difficulty: Beginner · About 25 min · Toyota 4runner
Replace a tail light bulb or the full tail light assembly on a 1996-2000 Toyota 4Runner.
Tools you will need
- Phillips head screwdriver
- 10mm wrench
Parts and supplies
- Tail light bulb
- Tail light assembly
Steps
- Swap just the bulb
Remove the tail light's two Phillips screws and pull it out, twist the socket counterclockwise and pull the bulb straight out, push in the new one, then twist the socket clockwise and refit the light.
- Remove the tail light assembly
Remove the Phillips screw in the luggage shelf bracket, remove the bracket and pull the trim panel out, disconnect the wiring harness, remove the ground bolt, then pull the harness out.
- Install the new assembly
Push the harness in, line up the new tail light and seat it, refit its two Phillips screws, reconnect the harness, refit the ground bolt through the wires, push the trim back into place, then refit the bracket and its screw.
Check your vehicle’s repair manual for exact specifications and fit.