How to Replace Blower Motor 07-11 Honda CR-V
Difficulty: Beginner · About 1 min · Honda Cr-v
Replace the cabin blower motor on a 2007–2011 Honda CR-V by lowering the passenger-side cover, transferring the electrical connector, and testing all fan speeds.
Tools you will need
- T25 Torx Driver
Parts and supplies
- Compatible HVAC blower motor
Steps
Access the blower motor
Turn the ignition off and move the passenger seat back. Release the lower glove-box cover to expose the blower motor and its wiring.
Remove the old motor
Unplug the motor connector and remove its retaining screws. Support the motor as the last screw comes out and lower it from the housing.
Install the replacement
Position the new motor in the housing and align its screw holes. Install the fasteners evenly and reconnect the electrical plug.
Refit cover and test
Reinstall the lower cover and check that it is fully clipped in. Run the fan at each speed and listen for rubbing or unusual vibration.
Check your vehicle’s repair manual for exact specifications and fit.