How to Replace Power Window Switch 01-05 Honda Civic
Difficulty: Intermediate · About 50 min · Honda Civic
Replace the master power window switch on a 2001–2005 Honda Civic by removing the door panel, transferring the switch to the door-pull panel, and reconnecting the wiring.
Tools you will need
- Phillips screwdriver
- Flat blade screwdriver
- Door panel removal tool
Parts and supplies
- Master power window switch
Steps
- Remove door trim and panel
Release the mirror trim, handle trim, and door-pull cover, then remove the exposed screws. Disconnect the lock rod, door-lock plug, and window harness, release the panel clips, and lift the panel away.
- Separate the switch panel
Remove the four screws securing the door pull to the panel. Release the switch-panel tabs, separate the assembly, then remove the three screws holding the old switch.
- Install the replacement switch
Seat the new switch in the panel and reinstall its three screws. Clip the switch panel back onto the door pull, then secure the door pull to the main panel.
- Reinstall and verify controls
Hang the door panel and press its clips into place. Reconnect the lock rod, lock wiring, and window harness, reinstall the screws and trim, then test the window and door lock.
Check your vehicle’s repair manual for exact specifications and fit.