How to Replace Blower Motor with Fan Cage 01-05 Chrysler PT Cruiser
Difficulty: Beginner · About 30 min · Chrysler Pt Cruiser
Replace the passenger-side HVAC blower motor on a 2001–2005 Chrysler PT Cruiser by releasing the lower dash cover, unplugging the motor, and fitting the replacement assembly.
Tools you will need
- Flat blade screwdriver
- 7mm socket and ratchet
Parts and supplies
- Blower motor with fan cage
Steps
- Lower the passenger dash cover
From beneath the passenger side of the dashboard, release the cover's push clips with a flat blade screwdriver. Lift the clip centers first where needed, then remove the cover without tearing its fabric.
- Disconnect and remove the blower motor
Unplug the motor wiring connector by releasing its lock. Remove the four 7mm mounting bolts, then lower the blower assembly from the HVAC housing.
- Prepare the replacement unit
Compare the new blower and fan cage with the removed assembly, checking the connector and mounting points. Attach the application-specific wiring adapter if the replacement requires one.
- Install the new blower
Raise the replacement into the housing and align its mounting holes. Start all four bolts by hand, tighten them evenly to the vehicle's specification, and reconnect the electrical harness.
- Refit the lower cover
Position the upholstered cover and insert each clip body into its opening. Press the center pins flush to lock the retainers, then run the fan through its speeds to confirm operation.
Check your vehicle’s repair manual for exact specifications and fit.