How to Replace Tail Light 98-03 Dodge Durango

Difficulty: Beginner · About 20 min · Dodge Durango

Replace a bulb or taillight assembly on a 1998–2003 Dodge Durango by removing the two accessible lamp screws.

Steps

1. Remove the lamp

   Turn off the ignition and exterior lights, then remove the two screws securing the taillight. Pull the assembly straight outward to release its locating pins without twisting the housing.

2. Replace the bulb or housing

   Disconnect the harness if removing the full assembly. Twist the bulb socket out, replace the failed bulb with the matching type, or transfer the sockets to the replacement lamp.

3. Reinstall and test

   Reconnect the harness, align the locating pins, and press the lamp evenly into place. Reinstall the screws and test the tail, brake, turn, and reverse lights.

Check your vehicle’s repair manual for exact specifications and fit.