How to Replace Tail Light Bulbs 05-10 Chrysler 300
Difficulty: Beginner · About 15 min · Chrysler 300
Replace the tail light bulbs on a 2005-2010 Chrysler 300.
Tools you will need
- Gloves
- 8mm socket
- Ratchet
Parts and supplies
- Tail light bulb
Steps
- Remove the tail light
Loosen the plastic thumb screw, pull the carpet back, remove the bracket's two thumb screws, disconnect the wiring harness, then pull the light out.
- Replace the tail light bulbs
Turn each bulb's base counterclockwise to remove it, then insert the new bulb and turn its base clockwise.
- Install the tail light
Reconnect the wiring harness, line up the bracket's bolt holes with the car's, replace the two thumb screws, refit the carpet, then replace the last thumb screw.
Check your vehicle’s repair manual for exact specifications and fit.