How to Replace Coolant Reservoir 01-12 Ford Escape
Difficulty: Beginner · About 2 min · Ford Escape
Replace the coolant reservoir on a 2001–2012 Ford Escape, working only on a cold engine and reconnecting both hoses before refilling with the correct coolant.
Tools you will need
- Hose Clamp Pliers
- Drain Pan
- 10mm Socket
- Ratchet
Parts and supplies
- Coolant reservoir
- Vehicle-specified coolant
Steps
Prepare the cooling system
Let the engine cool completely and place a drain pan beneath the reservoir. Do not remove a cap from a hot or pressurized cooling system.
Disconnect and remove the tank
Pinch the hoses only with suitable hose pinch pliers, release their clamps, and disconnect both lines. Remove the reservoir fastener and lift the tank out carefully.
Fit the replacement reservoir
Attach the lower hose and clamp, position the tank on its mounts, and secure its fastener. Reconnect the upper hose and verify both clamps sit behind their fittings.
Refill and check for leaks
Release any hose pinchers and fill to the specified cold level with the correct coolant. Inspect both connections for leaks and recheck the level after a full heat and cool cycle.
Check your vehicle’s repair manual for exact specifications and fit.