How to Replace Fog Light 00-04 Subaru Outback
Difficulty: Intermediate · About 40 min · Subaru Outback
Replace a fog light bulb or assembly on a 2000–2004 Subaru Outback by opening the lamp cover, releasing its fasteners, and reconnecting the wiring after installation.
Tools you will need
- 10mm socket and ratchet
- 12mm socket and wrench
- Flat blade screwdriver
- Penetrating oil
Parts and supplies
- Fog light bulb or assembly
Steps
- Open the fog light access
Release the plastic cover clip and fold the panel back to expose the bulb holder. Rotate the socket counterclockwise, disconnect the harness, and handle the replacement bulb by its base.
- Remove the old lamp assembly
Remove the plastic retaining nuts and apply penetrating oil to the two lamp bolts if corroded. Disconnect the wiring harness, remove the bolts, and guide the assembly out through the bumper opening.
- Install the replacement fog light
Position the new lamp in the bumper and reinstall its retainers. Connect the wiring harness, tighten the bolts securely, then return the access cover and clip to their original positions.
- Check the fog lamp
Switch on the fog lights and verify the lamp illuminates. Confirm the assembly is secure and the access cover does not contact the wiring.
Check your vehicle’s repair manual for exact specifications and fit.