How to Replace Fog Lights 97-98 Jeep Grand Cherokee
Difficulty: Intermediate · About 120 min · Jeep Grand Cherokee
Replace the fog-light assemblies on a 1997–1998 Jeep Grand Cherokee by removing the grille, lamps, and bumper cover, then checking the wiring and light alignment before reassembly.
Tools you will need
- Phillips Head Screwdriver
- 10mm Socket
- Ratchet
- T25 Torx Driver
Parts and supplies
- Fog-light assemblies
- Fog-light bulbs
Steps
- Remove the grille and front lamps
Remove the grille screws and lift the grille from its locating tabs. Remove the headlamp and marker-light fasteners, unplug their connectors, and set the lamp assemblies aside carefully.
- Release and remove the bumper cover
Remove the plastic retainers at the top, wheel wells, and lower edge of the bumper. Release the cover evenly and pull it forward, keeping the clips organized for reinstallation.
- Remove and replace the fog lights
Disconnect each fog-light harness and remove the assembly bolts. Fit the replacement lights in the same orientation, secure them with their fasteners, and reconnect the wiring.
- Reinstall the bumper and lamps
Guide the bumper cover into place, align the inner fenders, and reinstall its clips. Refit the marker lights and headlights, reconnect all harnesses, and secure the grille on its locating tabs.
- Test fog lights and inspect fit
Turn on the fog lights and confirm both illuminate. Check that the bumper is flush along its edges, the grille is secure, and no wiring is trapped behind the cover.
Check your vehicle’s repair manual for exact specifications and fit.