How to Replace Window Regulator 00-07 Ford Focus
Difficulty: Intermediate · About 50 min · Ford Focus
Replace a Ford Focus window regulator while keeping the glass supported and checking smooth movement before reinstalling the door panel.
Tools you will need
- T20 Driver
- 8mm Socket
- 10mm Socket
- Ratchet
- Flat Blade Screwdriver
Parts and supplies
- Window regulator
Steps
Remove the door panel
Release the window crank and handle trim, remove the panel screws, and lift the panel from its clips. Disconnect any wiring and carefully peel back the water barrier.
Secure the glass and remove the regulator
Loosen the glass-to-regulator fasteners and raise the glass into a supported position. Remove the regulator fasteners and guide the assembly out through the door opening.
Install the replacement regulator
Position the new regulator in the door and secure its mounting points. Lower the glass onto the regulator tracks and tighten the glass fasteners evenly.
Test and reinstall trim
Reconnect the switch or crank as needed and cycle the window through its travel. Once it moves smoothly, restore the water barrier and reinstall the speaker and door panel.
Check your vehicle’s repair manual for exact specifications and fit.