How to Replace Front Brakes 94-02 Dodge RAM 1500
Difficulty: Intermediate · About 60 min · Dodge Ram 1500
Replace front brake pads and rotors on a Dodge Ram 1500, servicing the caliper slides and checking pedal feel before driving.
Tools you will need
- Floor Jack
- Jack Stands
- 21mm Socket
- 10mm Hex Wrench
- Wire Brush
- Torque Wrench
Parts and supplies
- Front brake pads
- Front brake rotors, if worn
Steps
Raise the vehicle and inspect
Loosen the lug nuts on the ground, lift and support the truck securely, then remove the wheel. Inspect pad thickness and rotor condition before replacing parts.
Remove the caliper and rotor
Compress the pads slightly, remove the caliper slider bolts, and support the caliper without straining its hose. Remove the bracket and slide the rotor off the hub.
Prepare and install replacement parts
Clean the hub and rotor and service the caliper slides. Install the rotor and bracket, retract the piston carefully, fit the pads, and reinstall the caliper using vehicle-specific torque values.
Reinstall the wheel and test
Refit the wheel and torque its nuts to specification in a crossing pattern. Pump the pedal until firm, then perform a cautious low-speed brake check in a safe area.
Check your vehicle’s repair manual for exact specifications and fit.