How to Replace Power Window Motor 01-06 Hyundai Elantra
Difficulty: Intermediate · About 45 min · Hyundai Elantra
Replace a power window motor by opening the door trim, disconnecting the motor, and testing the glass before reinstalling the panel.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- Putty Knife
- 10mm Socket
- 10mm Wrench
Parts and supplies
- Power window motor
Steps
Remove the door panel
Pry off the trim covers and remove the panel screws. Release the panel clips, lift the panel away, disconnect its wiring, and carefully peel back the moisture barrier.
Remove the window motor
Disconnect the motor's electrical lead. Remove its three mounting nuts and pull the motor from the regulator assembly.
Install the replacement motor
Seat the new motor in the same position and tighten its mounting fasteners evenly. Reconnect the electrical lead and restore the moisture barrier.
Test the window and refit trim
Reconnect the switch wiring and operate the window through its travel, watching for binding. Reinstall the door panel clips, screws, and trim pieces.
Check your vehicle’s repair manual for exact specifications and fit.