How to Remove Reinstall Rear Bumper 06-11 Toyota Camry
Difficulty: Beginner · About 3 min · Toyota Camry
Remove and reinstall the rear bumper on a 2006–2011 Toyota Camry by marking its position, releasing the wheel-well fasteners, and checking the side clips afterward.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- Painter's Tape
- 10mm Socket
- Ratchet
Steps
Mark and remove fasteners
Protect the bumper edges and mark its position with painter's tape. Remove the wheel-well screws, lower fasteners, trim buttons, and bumper mounting bolts.
Release the bumper
Pull each side outward from its body guide, then support the bumper and separate it from the rear of the vehicle. Set it on a padded surface.
Align the bumper for installation
Bring the bumper into position and align the reference marks and mounting slots. Engage both side guides before installing the bolts.
Secure and inspect
Reinstall the mounting bolts, trim buttons, and wheel-well and lower screws. Check that the bumper sits evenly and is secure at both corners.
Check your vehicle’s repair manual for exact specifications and fit.