How to Replace Wiper Cowl Cover 02-08 Dodge Ram 1500
Difficulty: Intermediate · About 35 min · Dodge Ram
Replace the wiper cowl cover on a 2002–2008 Dodge Ram 1500 by removing the wiper arms and transferring the washer hoses and weatherstrip.
Tools you will need
- T25 Torx driver
- Trim clip tool
- Wire cutters for stubborn clips
Parts and supplies
- Wiper cowl cover
- Replacement push clips if needed
Steps
Remove the wiper arms
Park the wipers and switch off the ignition. Release the arm-end tabs and slide each arm from its splines, keeping track of left and right positions.
Release the cowl cover
Remove the end screws and carefully release the cowl clips. Lift out the sound-deadening material and weatherstrip, then disconnect the washer hoses from their retainers.
Install the replacement cowl
Position the new cover and engage its clips without pinching the washer hoses. Refit the weatherstrip, sound pad, hose retainers, and end screws.
Reinstall and test the arms
Align each arm with its original park position and press it onto the splines. Secure the arm retainers, then test wiper sweep and washer spray before driving.
Check your vehicle’s repair manual for exact specifications and fit.