How To Replace Front Inside Door Handle 98-01 Nissan Altima
Difficulty: Beginner · About 55 min · Nissan Altima
Replace the front inside door handle on a 1998–2001 Nissan Altima by removing the door panel, moving the lock rod to the replacement, and restoring the switch and trim connections.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
Parts and supplies
- Front interior door handle
Steps
Remove the door panel
Pry away the upper corner, switch, pull, and handle trim pieces. Disconnect the switch wiring, remove the pull fastener, then release the panel clips and lift the panel off.
Remove the old handle
Remove the handle trim and Phillips screw. Slide the handle back and out, release the lock rod from its retaining clip, and disconnect the rod from the handle.
Install the replacement handle
Connect the lock rod to the new handle and secure it in the retaining clip. Position the handle, install its screw, and replace the small trim piece.
Reinstall the panel and check the handle
Reconnect the window switch harness and align the panel with its clips. Reinstall the pull screw and trim pieces, then verify the handle releases the latch and the lock rod moves freely.
Check your vehicle’s repair manual for exact specifications and fit.