How to Replace Tail Light Housing 09-15 Honda Pilot
Difficulty: Beginner · About 20 min · Honda Pilot
Replace the tail light housing on a 2009-2015 Honda Pilot.
Tools you will need
- Socket extensions
- Flat blade screwdriver
- 8mm socket
- Ratchet
Parts and supplies
- Tail light housing
Steps
- Remove the tail light
Open the lift gate, remove its two 8mm bolts, pull it off the body, pull the wiring harness plug and harness out of the body, then disconnect the tail light's electrical connector.
- Install the tail light
Connect the electrical connector, feed the wiring harness into the body and push its plug in, line up the light using its locating pins, push it onto the body, install the two 8mm screws, then close the lift gate.
Check your vehicle’s repair manual for exact specifications and fit.