How to Replace Tail Light Bulbs 13-18 Subaru Forester
Difficulty: Beginner · About 20 min · Subaru Forester
Replace the tail light bulbs on a 2013-2018 Subaru Forester.
Tools you will need
- Socket extensions
- Phillips head screwdriver
- 10mm socket
- Ratchet
- Trim tool set
Parts and supplies
- Brake/running light bulb (7443)
- Backup bulb (921)
- Turn signal bulb (7440 amber)
Steps
- Remove the tail light
Open the hatch, remove its two 10mm bolts, pry out the pins holding it to the body, pull it out, then press the tab to disconnect the connector.
- Service the bulbs
Twist the bulb socket counterclockwise out of the light, pull the bulb off, push the new one on, then twist the socket clockwise back in — the top brake/running light is a 7443, the backup light a 921, and the turn signal an amber 7440.
- Reinstall the tail light
Connect the connector, press it into place, then tighten the 10mm bolts.
Check your vehicle’s repair manual for exact specifications and fit.