How to Install Rear Interior Door Handle 03-08 Honda Pilot
Difficulty: Beginner · About 20 min · Honda Pilot
Replace the rear interior door handle on a 2003–2008 Honda Pilot by releasing the handle trim and lock rod, then securing the replacement handle and screw.
Tools you will need
- Phillips screwdriver
- Flat blade screwdriver
- Needle nose pliers
Parts and supplies
- Rear interior door handle
Steps
- Remove the old handle
Open the handle and release the surrounding trim panel with a protected flat tool. Remove the Phillips screw, pull the handle from the door, and release the lock rod from its retaining tab.
- Install the replacement handle
Press the lock rod into the replacement handle's retainer and confirm it is fully captured. Position the handle in the door opening and reinstall the Phillips screw.
- Refit trim and test latch
Press the interior trim panel back into its clips. Operate the handle and lock with the door open to confirm the latch releases and returns normally.
Check your vehicle’s repair manual for exact specifications and fit.