How to Replace Tail Light Housing 06-10 Ford Explorer
Difficulty: Beginner · About 20 min · Ford Explorer
Replace the tail light housing on a 2006-2010 Ford Explorer.
Tools you will need
- Gloves
- 8mm socket
- Ratchet
Parts and supplies
- Tail light housing
Steps
- Remove the tail light
Remove the bracket's two 8mm bolts, pull the light out, disconnect its wiring harness, then turn the bulb bases counterclockwise to remove them.
- Install the new tail light
Turn the new bulbs' bases clockwise, reconnect the wiring harness, line up the bracket's bolt holes with the car's, then replace the two 8mm bolts.
Check your vehicle’s repair manual for exact specifications and fit.