How to Replace Blower Motor 00-07 Toyota Highlander
Difficulty: Beginner · About 25 min · Toyota Highlander
Replace the blower motor in a 2000–2007 Toyota Highlander by disconnecting its harness, removing three fasteners, and seating the replacement in the HVAC housing.
Tools you will need
- 8mm socket and ratchet
- T25 Torx driver
- Plastic trim tool
Parts and supplies
- Blower motor
Steps
- Disconnect the blower harness
Release the harness retainer from the blower motor and unplug the electrical connector by its lock. Keep the wiring clear of the motor opening.
- Remove the old blower motor
Remove the three motor fasteners with the appropriate T25 or 8mm tool. Ease the blower from its housing with a plastic trim tool, taking care not to crack the surrounding plastic.
- Install the replacement motor
Align the new blower with the housing and press it evenly into place. Reinstall the three fasteners and tighten them securely without damaging the housing.
- Reconnect and verify operation
Reconnect the electrical plug and secure its harness retainer. Test the blower at different speeds and listen for contact or vibration before completing the repair.
Check your vehicle’s repair manual for exact specifications and fit.