How to Replace Mirror 02-05 Mercury Sable
Difficulty: Beginner · About 45 min · Mercury Sable
Replace the side mirror on a 2002–2005 Mercury Sable and reconnect the mirror wiring before reattaching the door panel.
Tools you will need
- Phillips Head Screwdriver
- 6mm Socket
- 8mm Socket
- 11mm Socket
- Ratchet
- Door Panel Removal Tool
Parts and supplies
- Side mirror assembly
Steps
Remove the door panel
Disconnect the negative battery cable, remove the panel screws, and release the panel clips with a trim tool. Lift the panel away and unplug its wiring connectors.
Remove the existing mirror
Remove the small fastener beneath the mirror trim and lift off the triangular cover. Unplug the mirror connector, support the mirror from outside, remove its three mounting nuts, and lift the mirror away.
Install the replacement mirror
Feed the replacement harness through the door and seat the mirror against its gasket. Start and tighten the three nuts evenly, reconnect the wiring, and reinstall the insulator cover and triangular trim.
Reinstall and test the door panel
Reconnect the door panel harnesses, align the panel over the handle and lock, and press its clips into place. Reinstall the screws, reconnect the battery, and test mirror adjustment and door controls.
Check your vehicle’s repair manual for exact specifications and fit.