How to Replace Glove Box Light Bulb 02-06 Nissan Altima
Difficulty: Beginner · About 35 min · Nissan Altima
Replace the glove box light bulb on a 2002–2006 Nissan Altima by lowering the glove box, removing the surrounding trim, and reinstalling all clips and screws.
Tools you will need
- Phillips screwdriver
- Trim panel tool
Parts and supplies
- Glove box light bulb
Steps
- Lower the glove box
Press the two hinge pins inward to release them, then lift the glove box off the hinges. Unclip its tether and support the box so it does not hang by the strap.
- Remove the dash trim
Take out the four upper and two lower Phillips screws. Release the side rocker trims and gently work the dashboard trim free from its clips without bending the panel.
- Replace the light bulb
Turn the bulb holder counterclockwise to release it from the trim. Remove the old bulb from its socket, fit the correct replacement, and turn the holder clockwise to lock it in place.
- Reinstall the dashboard trim
Align the trim clips with their slots and press the panel into place until seated. Refit the side trims and reinstall all six Phillips screws without overtightening.
- Reattach the glove box
Reconnect the tether, align the glove box with its hinge points, and press both hinge pins into their slots. Open and close the box to confirm smooth movement and check that the lamp works.
Check your vehicle’s repair manual for exact specifications and fit.