How to Remove Bumper 09-11 Honda FIT
Difficulty: Beginner · About 3 min · Honda Fit
Remove and reinstall the front bumper cover on a 2009–2011 Honda Fit, releasing the wheel-well and lower clips and reconnecting fog lamps if equipped.
Tools you will need
- Phillips Head Screwdriver
- 10mm Socket
- Ratchet
- Trim Tool Set
Steps
Release the bumper fasteners
Protect the painted corners, then remove the fender-well screws and lower push clips. Release the upper-shield retainers with a trim tool and keep them organized.
Disconnect lamps and remove cover
Pull both bumper corners from their fender guides and release the tabs beneath the headlights. Support the cover as it comes forward, then unplug fog lamps if fitted.
Align and reconnect the cover
Reconnect the fog lamps and position the cover at the front of the vehicle. Engage the headlamp and fender tabs before installing the upper and side retainers.
Secure and inspect
Reinstall the lower screws and clips and restore the upper shield. Check that the cover sits evenly and that fog lamps operate.
Check your vehicle’s repair manual for exact specifications and fit.