How to Replace Front Wiper Blade Set 2011-2018 Ram 1500
Difficulty: Beginner · About 15 min · Ram 1500
Replace the front wiper blades on a 2011–2018 Ram 1500 using blades matched to the truck and connector style. Protect the windshield while the wiper arms are raised because an unprotected arm can snap back and crack the glass.
Tools you will need
- Gloves
- Safety glasses
- Soft cloth or folded towel to protect the windshield
Parts and supplies
- Front wiper blade set matched to the Ram 1500 year and cab configuration
Steps
Confirm blade fitment
Check the owner's manual or a VIN-based parts lookup for the correct driver- and passenger-side blade lengths and connector. Park the wipers, switch off the ignition, and place a folded towel on the windshield beneath each arm.
Release the old blade
Lift one wiper arm carefully and hold it steady. Open the blade's locking tab or release the connector using its molded latch, then slide the blade off without letting the bare arm touch the glass.
Install the replacement blade
Align the new blade's adapter with the arm hook or connector and slide it into place until the lock clicks. Gently tug the blade to confirm it is retained, then lower the arm onto the windshield slowly.
Test both wipers
Repeat on the other side, remove the protective towels, and wet the windshield with washer fluid. Run the wipers and confirm they sweep cleanly without skipping, striking trim, or contacting each other.
Check your vehicle’s repair manual for exact specifications and fit.