How to Replace Heater Blower Motor with Fan Cage 00-04 Nissan Frontier
Difficulty: Beginner · About 30 min · Nissan Frontier
Replace the heater blower motor and fan cage on a 2000–2004 Nissan Frontier by lowering the glove box, removing the motor, and transferring the air elbow.
Tools you will need
- Phillips screwdriver
- Flat blade screwdriver
Parts and supplies
- Blower motor with fan cage
Steps
- Remove the glove box
Remove the six Phillips screws holding the glove box, then lower the box and move it aside. Keep the screws together and avoid straining the hinges or nearby wiring.
- Remove the blower motor
Release the blower motor connector lock and unplug the harness. Remove the plastic air elbow and the three Phillips motor screws, then lower the assembly from the housing.
- Install the replacement motor
Align the motor tabs with their slots and raise the fan assembly into place. Install the three screws, refit the air elbow, and reconnect the wiring harness.
- Reinstall the glove box
Position the glove box and reinstall its six screws evenly. Check that the box opens and closes normally, then run the blower at several speeds to verify operation.
Check your vehicle’s repair manual for exact specifications and fit.