How to Replace Front Grille 03-08 Honda Pilot
Difficulty: Advanced · About 90 min · Honda Pilot
Replace the front grille on a 2003–2008 Honda Pilot by removing the bumper cover, transferring the grille clips, and reconnecting fog lamp wiring.
Tools you will need
- 10mm socket
- Ratchet
- Flat blade screwdriver
- Phillips screwdriver
- Assistant
Parts and supplies
- Front grille
Steps
- Remove the bumper cover
Open the hood and remove the radiator cover clips. Remove grille retainers, wheel well screws, lower bumper bolts, and splash shield fasteners, then release the bumper edges from their brackets.
- Disconnect and remove the cover
Support the bumper cover and disconnect the fog lamp wiring. Unclip the harness from the cover and lift the bumper away with help, placing it on a protected surface.
- Transfer the grille
Remove the five grille clips and separate the grille from the bumper cover. Align the replacement grille and press it into place, then reinstall its clips.
- Reinstall the bumper cover
Reconnect the fog lamp harness and align the bumper with its brackets. Engage the side tabs, reinstall the splash shield and wheel well fasteners, and refit the radiator cover.
- Check grille and lamps
Inspect the bumper alignment and confirm all retainers are seated. Test the fog lamps and check that the grille is securely attached.
Check your vehicle’s repair manual for exact specifications and fit.