How to Remove Engine Fuses 12-19 Nissan Versa
Difficulty: Beginner · About 15 min · Nissan Versa
Inspect and replace a fuse in the engine-bay panel of a 2012–2019 Nissan Versa using the fuse-box legend and the same rated replacement.
Tools you will need
- Fuse puller or panel tweezers
- Small flat blade screwdriver if required
Parts and supplies
- Replacement fuse of the specified type and amperage
Steps
Identify the correct fuse
Switch off the affected circuit and ignition. Open the engine-bay fuse-box cover and use its legend or the owner’s manual to identify the exact fuse position and amperage.
Remove and inspect the fuse
Release the fuse module cover as designed and use the supplied puller to remove the fuse straight from its slot. Inspect the internal link and confirm the replacement matches the specified rating.
Install the replacement fuse
Align the new fuse with the correct slot and press it fully into place. Never install a higher-rated fuse or bypass the fuse terminals.
Close the panel and test
Reinstall the module and fuse-box covers securely. Test the circuit; if the new fuse opens again, stop and have the wiring inspected for a fault.
Check your vehicle’s repair manual for exact specifications and fit.