How to Heater Blower Motor 11-16 Honda Odyssey
Difficulty: Beginner · About 25 min · Honda Odyssey
Replace the heater blower motor in a 2011–2016 Honda Odyssey by lowering the passenger-side trim, unplugging the motor, and securing the replacement in its housing.
Tools you will need
- Phillips screwdriver
Parts and supplies
- Heater blower motor
Steps
- Lower the glove box trim
Pull the lower dash panel beneath the glove compartment straight down to release its retainers. Disconnect the panel's electrical plug before moving it aside.
- Remove the blower motor
Disconnect the blower motor electrical connector, then remove its three Phillips screws. Lower the motor from the HVAC housing while keeping the wiring clear.
- Install the replacement motor
Place the new motor into the housing and align its mounting holes. Reinstall the three screws evenly, then reconnect the motor connector until the latch is secured.
- Reinstall trim and test
Reconnect the electrical plug to the lower dash panel and press the panel's retainers into place. Test the blower at multiple speeds and listen for unusual noise.
Check your vehicle’s repair manual for exact specifications and fit.