How to Replace Rear Door Speakers 14-17 Subaru Crosstrek
Difficulty: Intermediate · About 35 min · Subaru Crosstrek
Replace a rear door speaker on a 2014–2017 Subaru Crosstrek by removing the door panel, fitting the speaker, and reconnecting the window switch and latch cables.
Tools you will need
- Phillips screwdriver
- Flat blade screwdriver
- Trim panel tool
Parts and supplies
- Rear door speaker
Steps
- Remove the rear door panel
Release the door-pull and handle covers, then remove the pull screw. Free the panel clips, lift the panel upward, unplug the window switch, and unhook the door handle cables.
- Remove the original speaker
Remove the three Phillips screws holding the speaker. Pull it from the door, disconnect the harness, and inspect the connector and mounting surface.
- Install the replacement speaker
Connect the harness to the new speaker and seat it in the door opening. Reinstall the three screws evenly and check that the speaker is firmly mounted.
- Reassemble and test audio
Reconnect the window switch and door cables, then align the panel and press its clips in. Reinstall the pull screw and trim covers, then test speaker output and the window switch.
Check your vehicle’s repair manual for exact specifications and fit.