How to Replace Front Door Speakers 14-19 Toyota Tundra
Difficulty: Intermediate · About 35 min · Toyota Tundra
Replace the front door speaker on a 2014–2019 Toyota Tundra by removing the door panel, transferring the door cables, and checking audio before reassembly.
Tools you will need
- Socket Extensions
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- 10mm Socket
- Ratchet
- Trim Tool Set
Parts and supplies
- Front door speaker
Steps
Remove the front door panel
Switch off the ignition. Lift out the window switch and unplug it, then release the sail panel and handle trim. Remove the panel screws and clip, free the panel from its retainers, and lift it away while disconnecting the lock and latch cables.
Remove the old speaker
Unplug the speaker connector and remove the four 10 mm mounting screws. Lift the speaker from the door and check the connector and mounting surface for damage or moisture.
Install and connect the replacement speaker
Seat the new speaker in the door and reinstall its four mounting screws. Reconnect the electrical plug and route its wiring so it cannot be pinched behind the speaker or door panel.
Test audio and reinstall the panel
Test the speaker briefly at low volume, then switch the audio off. Reconnect the door cables and window-switch harness, align the panel, press its clips into place, and reinstall the screws and trim before checking the speaker and switches again.
Check your vehicle’s repair manual for exact specifications and fit.