How to Replace Rear Door Speaker 09-14 Ford F-150
Difficulty: Intermediate · About 40 min · Ford F-150
Replace a rear door speaker on a 2009–2014 Ford F-150 by removing the door panel, reconnecting the speaker wiring, and testing audio before restoring the switches and trim.
Tools you will need
- 5.5mm socket and ratchet
- 6mm socket and ratchet
- 8mm socket and ratchet
- Trim panel tool
- Pick tool
Parts and supplies
- Rear door speaker
Steps
- Remove the rear door panel
Release the handle bolt cover and upper window trim. Remove the 8mm and three 6mm panel bolts, unplug the window switch, lift the panel away, and disconnect the latch cable.
- Remove the old speaker
Remove the four small speaker fasteners and lift the speaker from the door. Disconnect its wiring plug and inspect the harness before fitting the replacement.
- Install the replacement speaker
Connect the harness to the new speaker and seat it in the opening. Reinstall the four fasteners evenly and check the speaker is secure against the door.
- Reassemble and check sound
Reconnect the latch cable and window switch, then hang the door panel on its lower clips. Reinstall all bolts and trim, and play audio to verify the speaker works.
Check your vehicle’s repair manual for exact specifications and fit.