How to Replace Front Brake Pads and Rotors 92-00 Toyota Camry

Difficulty: Intermediate · About 75 min · Toyota Camry

Replace front brake pads and rotors on a 1992–2000 Toyota Camry, clean the hub and sliding hardware, and restore a firm pedal before road testing.

Steps

1. Raise the vehicle and remove the wheel

   Loosen the lug nuts with the vehicle on level ground. Raise and support the front securely on jack stands, then remove the wheel and any hubcap.

2. Remove the caliper and rotor

   Unbolt the caliper slides and support the caliper so its hose is not stretched. Remove the bracket fasteners, bracket, pads, and rotor, keeping small hardware organized.

3. Clean and prepare the brake parts

   Brush rust from the hub and clean the bracket and pad clips. Retract the piston slowly with a suitable tool, then lubricate the slide pins and contact points sparingly.

4. Install the new rotor and pads

   Place the replacement rotor on the clean hub and remove its protective coating with brake cleaner. Refit the bracket, install pads with lubricant only on their metal contact points, and reinstall the caliper.

5. Refit the wheel and test the brakes

   Tighten the caliper and wheel fasteners to the vehicle's specification. Pump the brake pedal until firm before moving, then test braking gently at low speed in a safe location.

Check your vehicle’s repair manual for exact specifications and fit.