How To Replace Vehicle Speed Sensor 92-01 Honda Accord
Difficulty: Intermediate · About 60 min · Honda Accord
Replace the vehicle-speed sensor on a 1992–2001 Honda Accord after confirming its location for the exact engine and transmission, seating the drive post correctly, and checking the connector and speedometer.
Tools you will need
- Socket Extensions
- 10mm Socket
- Ratchet
- Flashlight
Parts and supplies
- Vehicle-speed sensor assembly
Steps
- Confirm the sensor location
Use the service information for the exact Accord engine and transmission to locate the vehicle-speed sensor. Disconnect the battery if the procedure requires it and clear dirt from the sensor area before unplugging anything.
- Remove the old sensor
Release the electrical connector and remove the sensor retaining bolts. Twist the sensor gently to free its seal, then lift it out with the drive post and inspect the bore for debris or a damaged seal.
- Install the replacement sensor
Align the drive post with its mating slot and seat the sensor straight into the opening. Install the retaining bolts to specification, reconnect the harness, and verify the connector lock is engaged.
- Verify the repair
Start the vehicle and check the speedometer and warning indicators during a cautious test. Stop if the speed reading is erratic or a leak appears around the sensor seal.
Check your vehicle’s repair manual for exact specifications and fit.