How to Replace Blower Motor 11-17 Toyota Camry
Difficulty: Beginner · About 60 min · Toyota Camry
Replace the blower motor on a 2011–2017 Toyota Camry by removing the passenger-side lower shield, disconnecting the battery and motor wiring, and testing the fan settings after installation.
Tools you will need
- Socket Extensions
- Flat Blade Screwdriver
- 8mm Socket
- 10mm Wrench
- Ratchet
Parts and supplies
- Blower motor assembly
Steps
- Disconnect power and remove the lower shield
Turn the ignition off and disconnect the negative battery terminal. Release the clips holding the lower passenger-side shield, unplug its connector, and move the shield aside to reach the blower motor.
- Remove the blower motor
Disconnect the motor electrical plug and remove its mounting bolts. Lower the motor carefully from the housing, keeping the wiring clear of the fan cage.
- Install the replacement motor
Position the replacement motor in the housing and start its bolts by hand. Tighten them evenly, reconnect the motor plug, and attach the shield connector before reinstalling the shield.
- Reconnect the battery and test the fan
Press the lower shield clips back into place and reconnect the negative battery cable. Turn the vehicle on and test the blower through its speed settings, listening for rubbing or vibration.
Check your vehicle’s repair manual for exact specifications and fit.