How to Replace Window Regulator 00-03 Nissan Maxima

Difficulty: Intermediate · About 55 min · Nissan Maxima

Replace a Nissan Maxima window regulator while supporting and removing the glass carefully, then reconnecting door modules and switches.

Steps

1. Remove the door panel and support the glass

   Release the switch and handle trim, remove the panel screws, and disconnect the door module and courtesy light. Peel back the water shield and remove the regulator bracket bolts.

2. Remove the glass and regulator

   Unplug the motor, remove the glass retainers, and lift the window out carefully. Remove the regulator and motor fasteners, then guide the assembly through the door opening.

3. Install the new regulator

   Transfer any required fastener to the replacement, position the regulator, and secure it. Reinstall the motor, reconnect its lead, lower the glass onto the track, and tighten the retainers.

4. Test and reinstall door trim

   Reconnect the switch temporarily and verify the window travels smoothly. Restore the moisture barrier, reconnect every module and courtesy light, then reinstall the panel and trim.

Check your vehicle’s repair manual for exact specifications and fit.