How To Replace Side Rear View Mirror 92-96 Ford F-150
Difficulty: Intermediate · About 40 min · Ford F-150
Replace a side mirror on a 1992–1996 Ford F-150 by removing the door panel and window crank, transferring the insulation pad, and tightening the mirror fasteners securely.
Tools you will need
- T20 driver
- T25 Torx driver
- 8mm socket and ratchet
- Phillips screwdriver
- Door panel clip tool
Parts and supplies
- Side mirror
Steps
- Remove the door panel
Pull the window crank outward at its base and remove the T20 screw, then take off the crank. Remove the panel screws and release the edge clips with a trim tool before lifting the panel away.
- Remove the old mirror
Remove the inside 8mm fastener and the two exterior T25 bolts. Support the mirror as the fasteners come free and lift it out of the door.
- Install the replacement mirror
Transfer the insulation pad to the new mirror if needed. Route the mirror into the door, align it with the mounting holes, and reinstall the two exterior bolts and inside fastener.
- Reassemble the door
Route the door handle through the panel and fit the panel over the lock. Press its clips into place, reinstall screws and the window crank, then test the mirror and window operation.
Check your vehicle’s repair manual for exact specifications and fit.