How to Remove Bumper 2013-2018 Subaru Forester
Difficulty: Beginner · About 3 min · Subaru Forester
Remove and reinstall the front bumper cover on a 2013–2018 Subaru Forester, disconnecting fog lamps and aligning the fender edges before replacing all push pins.
Tools you will need
- Flat Blade Screwdriver
- Trim Tool Set
Steps
Release lower and side retainers
Park safely and remove the push pins under the bumper. Unplug fog lamps if equipped, then release the wheel-well retainers on both sides.
Remove the bumper cover
Pull the bumper edges outward from the fender guides and release the upper pins. Support the cover as you lift it away from the vehicle.
Align and reconnect the cover
Position the cover in its upper guides, reconnect fog lamps, and engage the fender edges evenly. Press the upper clips in after confirming the side tabs are seated.
Secure and inspect
Reinstall the wheel-well and lower retainers. Check the cover is secure at both sides and verify fog lamps operate.
Check your vehicle’s repair manual for exact specifications and fit.