How to Replace Ignition Coils 99-2007 Volvo V70 2.4L
Difficulty: Intermediate · About 25 min · Volvo V70
Replace the ignition coils on a 1999-2007 Volvo V70 with the 2.4L engine.
Tools you will need
- Socket extensions
- T30 driver
- 10mm socket
- Ratchet
Parts and supplies
- Ignition coils
Steps
- Remove the old ignition coil
Remove the engine cover's T30 Torx bolts and oil cap, remove the cover, replace the oil cap, press the timing belt cover's clips back and lift it, remove the coil's 10mm bolt, disconnect its wiring harness, then remove the coil.
- Install the new ignition coil
Insert it into place, tighten its 10mm bolt, connect the wiring harness, clip the timing belt cover back on, remove the oil cap, refit the engine cover, replace the oil cap, then tighten the cover's T30 Torx bolts.
Check your vehicle’s repair manual for exact specifications and fit.