How To Replace Front Door Check 92-00 Honda Civic
Difficulty: Intermediate · About 3 min · Honda Civic
Replace the front door check strap on a 1992–2000 Honda Civic by removing the door panel, supporting the door, and verifying the replacement holds its detents.
Tools you will need
- 12mm Socket
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- Putty Knife
- 10mm Socket
- Door Panel Removal Tool
- Ratchet
Parts and supplies
- Compatible front door check strap
Steps
Remove the door panel
Release the handle, pull, and switch trim and remove the panel screws. Free the panel clips, lift the panel away, and disconnect lock, window, and speaker wiring.
Remove the door check
Support the door so it cannot swing while the check is detached. Remove the door-edge and inner mounting bolts, then guide the strap out of the door.
Install the replacement strap
Insert the new check into the opening and align its mounting points. Start all fasteners by hand, then tighten them to the vehicle specification.
Reassemble and test
Reconnect wiring and the handle rod, then align the panel and press its clips into place. Reinstall trim and test the door's hold positions and smooth movement.
Check your vehicle’s repair manual for exact specifications and fit.