How to Check and Fill Fluids 01-05 Honda Civic 1.7L 4-cyl
Difficulty: Beginner · About 15 min · Honda Civic
Check the engine oil, coolant, brake fluid, power steering fluid, and automatic transmission fluid on a 2001–2005 Honda Civic with its engine and fluid temperatures in mind.
Steps
Check power steering fluid
Park on level ground and switch off the engine. Check the power steering reservoir against its marked full line, and add only the specified fluid if the level is low.
Check engine oil
With the engine off, wait briefly for oil to drain into the pan. Remove the dipstick, wipe it clean, fully reinsert it, then withdraw it again and confirm the oil lies within the marked range.
Inspect coolant only when cold
Never open a hot cooling system. Once the engine is completely cool, check the coolant level against the reservoir's minimum and maximum marks and inspect for visible leaks or contamination.
Inspect brake fluid
Check the brake-fluid reservoir level against its markings without allowing dirt into the system. If the fluid is low, unusually dark, or the brake warning is on, investigate for leaks and follow the vehicle's service guidance before adding fluid.
Check automatic transmission fluid
Follow the owner's manual for the required engine temperature and selector position. On level ground, use the transmission dipstick procedure, wipe and reinsert the dipstick, then confirm the level is between the specified marks.
Check your vehicle’s repair manual for exact specifications and fit.