How To Replace Fog Light Assembly 04-09 Subaru Outback

Difficulty: Beginner · About 30 min · Subaru Outback

Replace a fog light assembly on a 2004–2009 Subaru Outback by lowering the underbody shield and transferring the bulb connector to the new housing.

Steps

1. Lower the underbody shield

   Remove the plastic retainers securing the shield near the fog lamp. Pull the shield down enough to reach the rear of the assembly.

2. Remove the old fog light

   Disconnect the bulb electrical plug and remove the two lower assembly retainers. Push the housing forward through the bumper and support it as it comes free.

3. Install the replacement housing

   Align the replacement fog light with the bumper opening and press it into place. Install and lock both retainers, then reconnect the bulb plug.

4. Secure the shield and test

   Reinstall the underbody shield retainers and ensure they lock. Turn on the fog light and confirm the assembly is secure and illuminated.

Check your vehicle’s repair manual for exact specifications and fit.