How to Replace Headlights 07-11 Honda CR-V
Difficulty: Intermediate · About 65 min · Honda Cr-v
Replace a headlight assembly on a 2007–2011 Honda CR-V by removing the bumper cover and transferring the original bulbs and mounting bracket.
Tools you will need
- 10 mm socket and ratchet
- Flat blade screwdriver
- Trim tool
Parts and supplies
- Compatible headlight assembly
- Replacement bulbs if needed
Steps
Remove the bumper cover
Switch off the lights and ignition. Release the upper cover retainers, lower fasteners, and side screws, then ease the bumper sides free and set the cover aside safely.
Remove the headlight assembly
Release the side retainer and remove the headlight fasteners. Pull the lamp forward and unplug its connectors, keeping the harness clear of sharp edges.
Transfer bulbs and bracket
Twist the bulb sockets out of the old housing and transfer serviceable bulbs to the replacement. Move the mounting bracket over and secure it in the same orientation.
Install the new lamp
Reconnect the harness, align the locating points, and seat the assembly in the body. Reinstall its fasteners and engage the side retainer before refitting the bumper.
Reassemble and aim
Align the bumper cover and press its clips into place, reinstalling all lower and side fasteners. Test every lamp and verify headlight aim using the vehicle procedure.
Check your vehicle’s repair manual for exact specifications and fit.