How To Remove Front Door Panel 02-06 Honda CR-V
Difficulty: Beginner · About 45 min · Honda Cr-v
Remove and reinstall a front door panel on a 2002–2006 Honda CR-V, disconnecting the window switch, lock switch, and interior handle before lifting the panel clear.
Tools you will need
- Flat blade screwdriver
- Phillips screwdriver
- Trim panel tool
Steps
Remove mirror and handle trim
Release the mirror trim clip and disconnect its harness. Pry off the inner handle trim and remove the two Phillips screws behind the handle and beneath the armrest.
Disconnect the door handle
Lift the power window switch and unplug its connectors. Remove the handle from its clip and disconnect the lock switch wiring.
Release and remove the panel
Pull around the panel edges to release the retaining clips. Lift the panel away and unplug its remaining electrical connectors.
Reconnect and reinstall
Reconnect the panel wiring and route the window switch harnesses through their openings. Align the panel and press its clips into place.
Secure trim and test
Reinstall the armrest and handle screws, reconnect the lock switch, and refit the handle and mirror trim. Test the window and lock controls.
Check your vehicle’s repair manual for exact specifications and fit.