How to Replace Ignition Coil 93-97 Dodge Intrepid
Difficulty: Intermediate · About 45 min · Dodge Intrepid
Replace an ignition coil on a 1993-1997 Dodge Intrepid.
Tools you will need
- Ratchet
- 1/4 inch ratchet
- Socket extensions
- Flat blade screwdriver
- 10mm wrench
Parts and supplies
- Ignition coil
Steps
- Disconnect the battery
Disconnect the negative battery cable with a 10mm wrench.
- Remove the air intake hose
Loosen its clamps with a screwdriver and pull it off.
- Remove the old coil
Unplug its wiring harness, disconnect the spark plug wires one at a time, transferring each straight to the matching spot on the new coil as you go so none get crossed, then remove the four 10mm bolts and pull the coil off.
- Install the new coil
Set it in place, insert the four 10mm bolts, finish moving over any remaining spark plug wires one at a time, then reconnect the wiring harness.
- Reinstall the air intake hose
Fit it back on and hand-tighten its clamps.
- Reconnect the battery
Reconnect the negative battery cable.
Check your vehicle’s repair manual for exact specifications and fit.