How to Replace Rear Door Check 14-17 Subaru Crosstrek
Difficulty: Intermediate · About 60 min · Subaru Crosstrek
Replace the rear door check on a 2014–2017 Subaru Crosstrek by removing the door panel and speaker, then securing the new check before restoring the trim.
Tools you will need
- Flat blade screwdriver
- Phillips screwdriver
- Trim tool
Parts and supplies
- Rear door check
Steps
Remove the rear door panel
Release the covers in the door pull and handle and remove the exposed Phillips screw. Free the panel clips, lift the panel off, and disconnect the window switch and handle cables.
Remove the speaker
Remove the three Phillips screws holding the speaker and unplug its wiring. Set the speaker aside to access the door check fasteners.
Replace the door check
Remove the three 10mm bolts securing the check and withdraw it through the door. Position the replacement in the same orientation and reinstall its bolts securely.
Reinstall the speaker and panel
Reconnect the speaker and secure it with its screws. Reconnect the switch and handle cables, align the panel, press in its clips, and reinstall the screws and trim covers.
Check door movement
Open and close the door to confirm the check holds it at the intended positions. Verify the panel and speaker are secure and the window switch functions.
Check your vehicle’s repair manual for exact specifications and fit.