How to Replace Side Power Mirrors 95-05 Ford Ranger
Difficulty: Intermediate · About 45 min · Ford Ranger
Replace a power side mirror on a 1995–2005 Ford Ranger by removing the door panel and speaker, transferring the wiring, and testing the mirror after reassembly.
Tools you will need
- Phillips screwdriver
- 6mm socket and ratchet
- 11mm socket and ratchet
- Flat blade screwdriver
Parts and supplies
- Power side mirror
Steps
- Remove the door panel
Remove the two door-pull screws and lift the handle panel away. Disconnect its wiring, remove the remaining panel screws, then lift the panel off the door.
- Remove the speaker and mirror
Remove the four 6mm speaker screws, withdraw the speaker, and unplug it. Disconnect the mirror harness, release the weatherstrip behind the mirror, and remove the three 11mm mirror nuts while supporting the mirror.
- Install the replacement mirror
Seat the new mirror against the door and start its three nuts by hand. Tighten them securely, reconnect the mirror wiring, and press the weatherstrip back into place.
- Reinstall speaker and door panel
Reconnect the speaker and secure it with its four screws. Hang the door panel in its slots, reconnect the handle wiring, press the panel into place, and reinstall its screws and handle trim.
Check your vehicle’s repair manual for exact specifications and fit.